Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The S, ZETA and ES series stepper motors were discontinued in 2022.

...

OEM83-62-MO

OEM83-62-MO-DS34

OEM83-93-MO

OEM83-93-MO-DS34

OEM83-135-MO

OEM83-135-MO-DS34

Info

Complete list of retired motors

All custom products based on the above parts are also discontinued, for example:

...

This chart shows the ES, S, and ZETA motor with shared characteristics along with the recommended HV replacement. See the notes column and associated footnotes that summarize mechanical differences

...

Notes for selecting HV as replacements

NEMA23 : ES2x, S57-xx, ZETA57-xx models

...

HV23x motors have the same face mounting, shaft length and shaft diameter (0.25inch)

...

S57-xx, ZETA57-xx models include a rubber boot and 9-pin connector pre-wired for a ZETA drive. ES2x and HV23 motors do not include a connector

...

  1. HV23x-02-10 : Double shaft with a single flat

  2. HV23x-01-10 : Single shaft with a single flat

  3. HV23x motors are not available with keyways

  4. -E or -EC models include a 1000 lines encoder. HV23x motors can be supplied with a similar 1000ppr encoder. Request through a local distributor as a custom product.  Please note the HV motors with encoder will have a 10 piece MOQ required per shipment and so in many cases if an encoder is required, converting the system to a servo solution may be the better option.

  5. HV34x-02-10 : Double shaft with a double flat

  6. HV34x-01-10 : Single shaft with a double flat

  7. HV34x-04-10 : Double shaft, round

  8. HV34x-03-10 : Single shaft, round

  9. HV34x motors are not available with keyways

  10. 10. -E or -EC models include a 1000 lines encoder. HV34x motors can be supplied with a similar 1000ppr encoder. Request via Extranet Quote system, Custom Electronics

NEMA23 : ES2x, S57-xx, ZETA57-xx models

Info
  • HV23x motors have the same face mounting, shaft length and shaft diameter (0.25inch)

  • S57-xx, ZETA57-xx models include a rubber boot and 9-pin connector pre-wired for a ZETA drive. ES2x and HV23 motors do not include a connector

  • S/ES/ZETA motors had tapped holes on the rear plate to mount an encoder. HV motors do not have tapped holes unless requested as a custom product.

NEMA34 : ES3X, S83-xx, ZETA83-xx models

Info
  • HV34x motors have the same face mounting as the S83/ES3/ZETA83 motors

  • S/ES/ZETA motors had tapped holes on the rear plate to mount an encoder. HV motors do not have tapped holes unless requested as a custom product.

  • To support higher available torque, HV34x motors have 0.5inch shaft diameter compared to 0.375 inch for ES/S/ZETA.

...

  • Due to the shaft diameter difference, users should also review requirements for keys and flats. In general, HV34 motors with double flats (01,02) will have the best lead times.

  • S83-xx, ZETA83-xx models include a rubber boot and 9-pin connector pre-wired for a ZETA drive. ES3x and HV34 motors do not include a connector

...

HV34x-02-10 : Double shaft with a double flat

...

HV34x-01-10 : Single shaft with a double flat

...

HV34x-04-10 : Double shaft, round

...

HV34x-03-10 : Single shaft, round

...

HV34x motors are not available with keyways

...

ZETA Systems

ZETA part numbers that do not include -MO indicate a motor plus ZETA4 drive system. For example, ZETA57-51 includes ZETA4 and ZETA57-51-MO. The ZETA4 drives were discontinued as of 2024.

...