...
650 – “Original” drive. Operated in V/Hz mode only.
650V – “Vector” drive had sensorless vector control built in (in addition to V/Hz mode).
650G – Was a 650V drive in almost every aspect, but with performance enhancement traits tailoring it to China’s target market at the time. Primarily operated at slower speeds.
650S – “Servo” was capable of sensorless vector PMAC control. Originally out of Europe.
Information was/is limited for this variant in North America. Support was limited in the US then, and is no longer available now.
65x – “Unique” variants such as the “652-“. Originally out of Europe.
Documentation denoting these variants is limited in North America. Many were, and remain, proprietary to Parker Europe (EME) or their customers. Support was limited in the US then, and is no longer available now.
...
There is no drop-in replacement for the 650 family.
Advisement: Please see this FAQ for replacement paths. Your local Parker Distributor/Integrator can assist with modern drive implementation.
...
Project and Firmware compatibility: 650 Series - Project and Firmware Compatibility
650V Drive will accept 650G templates – Some parameters may need to be reconfigured
650G Drive will accept 650V templates – Some parameters may need to be reconfigured
See below in “Software Info” for DSELite download and additional firmware notes.
...
CELite - OBX software. No longer supported.
CE - OBX software. No longer supported.
DSELite– Modern (free) software used to communicate to current products if not an old LINK product.
Help files can be found when you right click any function block.
DSELite can flash firmware on a 650, but it must be within the same major revision.
Link to DSELite Download and Cable Required to Communicate to a 650.
Important Software Notes:
...