...
Step 5. Switch off the coupler.
<width="100">
SWITCH | Function | 1MBIT | 800KB | 500KB | 250KB | 125KB | 100KB | 50KB | 20KB | 10KB | Indicated by LEDS |
|---|---|---|---|---|---|---|---|---|---|---|---|
1 (LSB) | Baudrate | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | STOP |
2 | Baudrate | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 | 0 | RUN |
3 | Baudrate | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | TX-Overflow |
4 (MSB) | Baudrate | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | RX-Overflow |
5 |
To set the node id:
Step 6. Make sure the coupler is off.
...