...
IPA Controllers ship with IP address default of 192.168.100.1
...
Switch Setting | Unit IP Address | |
Hardware | 1 (S1=1, S10=0) | 192.168.100.1 |
Hardware | 2-98 (S1=2, S10=0) Example: 14 (S1=4, S10=1) | 192.168.100.(S10)(S1) |
Software | 99 (S1=9, S10=9) | User defined via IP command |
Software | 99 (S1=9, S10=9) | User defined via IP command Set IP "0.0.0.0" or Set IP "255.255.255.255" to have the controller accept address from a DHCP server |
Utility | 0 (S1=0, S10=0) | 192.168.100.1 (see note below) |
Hardware Assignment:
Change the switches to desired address in the range shown above then cycle power or issue REBOOT command for the new address to take effect.
...