...
******Valid for OS version 1.10 and higher.
Switch Setting | Unit IP Address | |
Hardware | 0 (x1=0, x10=0) | 10.10.10.10 |
Hardware | 1 (x1=1, x10=0) | 192.168.100.1 |
Hardware | 2-98 (x1=2, x10=0) Example: 14 (x1=4, x10=1) | 192.168.100.(x10)(x1) |
Software | 99 (x1=9, x10=9) | User defined via IP command |
Software | 99 (x1=9, x10=9) | User defined via IP command Set IP "0.0.0.0" or Set IP "255.255.255.255" to have the controller accept address from a DHCP server |
Hardware Assignment:
Change the switches to desired address in the range shown above then cycle power or issue REBOOT command for the new address to take effect.
...