Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

When getting or setting any analog information to and from the OPTO22 rack the units of the values are the Engineering units that are setup for that Analog Point. These units are set in the OPTO22 software and can't be changed by the 6K. For more information about how those units are set or changed please contact OPTO22 at the following link:

www.opto22.com

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.