Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next ยป

Output On-Position (using the OUTP command) can only be used with the onboard outputs and not with the expanded brick outputs.

The difference is that the onboard outputs have comparators directly associated with them. These comparators are used for the Output On-Position. There is essentially no delay for an output on position because the outputs are tied directly to the comparators.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.