Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

While Motion Planner is connected via RS-232 to Port 2 on the 6K and a WRITE command is issued inside a program, the WRITE command will not display on the terminal. The remedy for this problem is to command a PORT2 before the WRITE command. Commanding PORT2 will select the second port for the WRITE command instead of the default PORT1.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.