Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

The PTI PAC Terminal can be used with the Web Visualization option on the PAC controller:

PTI_5F00_webvisu_5F00_run_5082-20240521-001108.JPG

Note the full address for the target ip in the setup menu must include   http://  at the beginning.

The default name of the web visualization is webvisu and the port is 8080.

Thus the full address by default would be:

http://192.168.10.50:8080/webvisu.htm

pti_webvisu_setup_5083-20240521-001108.jpg

If the IP address is not set correctly, the PAC Terminal Loading screen will be running trying to make the connection with the status bar:

image-20240213-220116.png

4/25/17jh

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.