The Dynaserv motors uses IKO crossed-roller bearings. These bearings are capable of taking such complex loads as radial, thrust and moment loads at the same time. They are widely employed in industrial machines, industrial robots, medical apparatus, etc.
DYNASERV BEARING SPECIFICATIONS
Specification/Unit | DM-B | DM-A/DR-A | DR-E | DR-B |
|---|---|---|---|---|
Inner Diameter/mm | 90 | 190 | 120 | 106 |
Outer Diameter/mm | 130 | 240 | 180 | 140 |
Average Diameter/mm | 110 | 215 | 150 | 123 |
Thickness/mm | 16 | 24 | 25 | 16 |
Basic Dynamic Load Rating/kgf | 1500 | 4350 | 5080 | 2050 |
Basic Static Load Rating/kgf | 2440 | 8300 | 7610 | 2440 |
Pre-Load/kgf | 305 | 595 | 439 | 288 |
Static Axial(Compression) Load Permitted/kgf | 3000 | 4000 | 4000 | 3000 |
Static Axial(Tension) Load Permitted/kgf | 1000 | 2000 | 2000 | 1000 |
Static Over Hung Load/kgfm | 20 | 40 | 40 | 20 |
Axial(Compression) Stiffness/mm/kgf | .000025 | .00002 | .00002 | .00003 |
Axial(Tension) Stiffness/mm/kgf | .00003 | .00003 | .00003 | .00004 |
Over Hung Load Stiffness/rad/kgfm | .00001 | .000004 | .000004 | .00002 |
0 Comments