Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

When using the Setup feature to configure the soft limits in Motion Architect, it refers to them as "LSCW" and "LSCCW." "LSCW" and "LSCCW" are not documented in the new Software Reference Guide. These commands were re-named to "LSPOS" and "LSNEG"; however, the old ones still work. Whenever you change one of these commands, the other corresponding one also changes.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.