Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

The APEX drives allow the user to build external regeneration circuits by disabling the Regen Fault when SW1 #1 is turned ON.

The APEX10 has this capability.

This feature was not enabled until Rev G of the firmware for an APEX20 & 40. The first firmware to have this feature for the APEX20 & 40 is 92-013834-01 REV G.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.