Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

You need to have the HV voltage connected on the drive when you download the configuration for the drive. This is VERY important, especially if the voltage is below 80 Vdc. The drive measures the voltage and sets the current loop gains appropriately. If no HV is present, it assumes 80 Vdc.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.