Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

It is possible to use the Aries with a motor that only has Hall Effects and no encoder. The drive is now a trap-drive and not a sinusoidal drive as it is when using an encoder.

To set it up, OHALL must equal 1 for Hall-only trapezoidal commutation. If you're not using an encoder at all, then be sure to set SFB to 2.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.