Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

The ACR8020 must be used with a ATX PCI backplane and power supply that has 3.3VDC and 5VDC supplied to the PCI slots. The ACR8020 will not operate without both

NOTE: The DSP manufacturer states that the chip can be damaged if run without both voltages.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.