Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

ContentBody{} FormattedBody{value='

When AcroCut and AcroMill are used in a DOS system and an error message is received when starting AcroCut/AcroMill: "Error 31 Bad flowfile encountered"

This error is caused by not having enough Files and Buffers specified in the Config.Sys file in DOS.
Increase to
FILES=40
BUFFERS=40

', representation=storage}

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.