/
Leds On the Back of the Profibus Card
Leds On the Back of the Profibus Card
- Perla Madrigal (Unlicensed)
- Eric Rojas (Unlicensed)
Owned by Perla Madrigal (Unlicensed)
Last updated: Aug 01, 2024 by Eric Rojas (Unlicensed)
The following table explains what indicator LED displayed on the back of the Profibus card represents.
BOTTOM | TOP | PROBLEM |
OFF | RED | Node is not connected. |
RED | RED | Wires are crossed on the network. |
RED | Blinking GM/Red | Terminating Resistor not set on I/O side. |
GREEN | RED | Terminating resistor on PowerStation side needs to be turned on. |
GREEN | GREEN | Working properly. |
, multiple selections available,
Related content
Why Is the LED on the Control Board Flashing 50% Red and 50% Green?
Why Is the LED on the Control Board Flashing 50% Red and 50% Green?
More like this
My Aries Controller Boots Directly to a Red LED
My Aries Controller Boots Directly to a Red LED
More like this
PC21 Fault LED
PC21 Fault LED
More like this
ACR2000 Green LED Blinks on and off
ACR2000 Green LED Blinks on and off
More like this
New 8010 has Red Lights on Startup
New 8010 has Red Lights on Startup
More like this
Why Is My DS1 LED Red On My PC21?
Why Is My DS1 LED Red On My PC21?
More like this