Parker Electronic Motion and Controls

Parker EMC Industrial Public Knowledge Base

EMC Industrial Public Knowledge Base

All content
Space settings

Results will update as you type.

•
6K Accessories - EVM32 and SIM Card Compatibilities
•
6K Accessories - EVM32 Max Cable Length
•
6K Accessories - External Third Party I/O Modules
•
6K Accessories - Joystick Options.
•
6K Accessories - Operating Voltage for EVM32-II Output Relays
•
6K Accessories - OPTO22 to 6K Analog Units
•
6K Accessories - USB-to-Serial Adapters with Motion Planner
•
6K Accessories - Using a Thumbwheel with My 6000/6K Controller?
•
6K Hardware - Analogue Input Resolution
•
6K Hardware - Flash Memory Limitation and Battery Backed RAM
•
6K Hardware - How to Connect an Older Parker Step Motor's Encoder (-E Option) to 6K
•
6K Hardware - Maximum Encoder Input Frequency
•
6K Hardware - Where is The Outdiode Connection?
•
6K Misc - Automating the ARP -S Procedure
•
6K Misc - Battery Replacement for 6K & 6000 Series Products
•
6K Misc - Can the 6K Accept Multiple Ethernet Connections
•
6K Misc - Command Cross Reference (6K to ACR)
•
6K Misc - Communication Protocols
•
6K Misc- Completely Reset the 6K to Factory Default via Hardware
•
6K Misc - Completely Reset the 6K to Factory Default via Software
•
6K Misc - Connecting a Motion Panel to a 6K.
•
6K Misc - Connecting to the Gemini and the 6K Simultaneously
•
6K Misc - Creating 6K Backup Programs
•
6K Misc - Custom 6K Firmware (No Longer Quoting New 6K Custom Features)
•
6K Misc - Daisy Chaining with 6000 or 6K Products
•
6K Misc - Ethernet (TCP/IP) Communications via HyperTerminal
•
6K Misc - Ethernet Client Capability
•
6K Misc - Ethernet Equipment Needed for Communication?
•
6K Misc - Feedrate Override in the 6K.
•
6K Misc - Fieldbus Data Transfer Rates
•
6K Misc - How can I Download My 6K OPS Without Windows?
•
6K Misc - Is the 6K UL Recognized?
•
6K Misc - Letter of Volatility
•
6K Misc - Limits/Home Inputs On 6K2
•
6K Misc - Motion Planner Minimum Requirements (Not Compatible with WIN10 or Later)
•
6K Misc - MX80L With VIXNNNAH AND 6K Notes
•
6K Misc - Necessary Files for Motion Planner.
•
6K Misc - OS Firmware and Hardware Compatibility (6K, GT6K, GV6K)
•
6K Misc - Outputs on Position (OUTP Command)
•
6K Misc - Serial Communication Protocols.
•
6K Misc - Serial Communications
•
6K Misc - Servo Update Rate
•
6K Misc - Target Zone Bit with Stepper
•
6K Misc - Tuning 6K and Gemini--Starting Parameters
•
6K Misc - What is Saved in the 6K Memory (Non-Volatile Memory)?
•
6K Misc - Windows NT/2000/XP and NTFEN
•
6K Software - Assigning a Variable Value to an Analogue Output
•
6K Software - Assigning Binary Variables (VARB)
•
6K Software - Binary Variables (VARB)
•
6K Software - Changing Outputs with Complied Motion.
•
6K Software - Com6srvr for Large File Sizes
•
6K Software - Commanded Processing in the 6K with SYSPER
•
6K Software - Compatibility with Motion Toolbox or Motion OCX
•
6K Software - Connecting to 6K with Visual Basic
•
6K Software - Connection to the 6K with Visual C++
•
6K Software - Does a !K Command Stop a PLC Program?
•
6K Software - Example Program for General Motion
•
6K Software - Following a Virtual Master
•
6K Software - Halting a Task.
•
6K Software - Home to Z Channels for Rotary Applications
•
6K Software - How do I Use Scaling in the 6K
•
6K Software - How Long Does the 6K Take to Execute Commands?
•
6K Software - How to Disable the Power-Up Banner Message
•
6K Software - How to Use the COM6SRVR with LabVeiw
•
6K Software - INFNC Program Selection
•
6K Software - LabVIEW / MOTION TOOLBOX Products
•
6K Software - Minimum Distance Per Compiled Segment
•
6K Software - Motion Planner and Visual Basic Script (Not WIN10 Compatible)
•
6K Software - PLCP Execution
•
6K Software - Position Maintenance Mode
•
6K Software - PPRO Scaling
•
6K Software - Reading Analogue Inputs with the COM6SRVR
•
6K Software - Rounding Variables in 6000 or 6K Products
•
6K Software - Running Motion Planner on Windows 7 OR Windows 10?
•
6K Software - Sending Commands ViaRS232
•
6K Software - TASF BIT 1 -- Moving/Not Moving
•
6K Software - TASF BIT 28 -- Registration Move
•
6K Software - TASF BITS 24 & 25 -- Target Zone
•
6K Software - Task Swapping (Multi-Tasking Feature)
•
6K Software - Updating the COM6SRVR.EXE File
•
6K Software - Using the COM6SRVR as an ActiveX (OCX) Component
•
6K Software - Using the COM6SRVR Without Motion Planner
•
6K Software - Using the LIMFNC Command for Limits and Home
•
6K Software - Where is the Communication (COM6SRVR) Server Located?
•
6K Software - Why Do I Get A *B and *C when I Turn on My 6K?
•
6K Training - Express Basics Training: How to Connect Ethernet - Includes WIN7 (VIDEO)
•
6K Training - Express Basics Training: How to Upload & Download to 6K Controllers (Video)
•
6K Troubleshooting - Cannot Connect to DVT Camera After Reset or Power Cycle
•
6K Troubleshooting - COM6SRVR Uses 100% of CPU
•
6K Troubleshooting - EFAIL Command Clarification
•
6K Troubleshooting - Encoder Input Impedance
•
6K Troubleshooting - How do I Know what Error Started the Error Program
•
6K Troubleshooting - I Cannot ARP -S in WIN95
•
6K Troubleshooting - I Cannot Read the Encoder Position (COM6SRVR)
•
6K Troubleshooting - KDRIVE1 Does Not Disable Drive on a Stall
•
6K Troubleshooting - Master Slave Distance Mismatch Error (Following)
•
6K Troubleshooting - Memory Errors in Stand-Alone Products
•
6K Troubleshooting - Motion Panel Loses Communication Periodically
•
6K Troubleshooting - Motion Planner/Communication Server
•
6K Troubleshooting - My .TLB File Does Not Work (COM6SRVR)
•
6K Troubleshooting - My 6K Locks Up During a Download
•
6K Troubleshooting - My 6K Stops When I Cut Power to My EVM32
•
6K Troubleshooting - My Ethernet Is Locking Up
•
6K Troubleshooting - My Servo Motor Is Not Moving
•
6K Troubleshooting - No Remote Panel Error or Power-Up SEQUENCE FAILURE
•
6K Troubleshooting - RS232 Troubleshooting for 6K / 6000 Products
•
6K Troubleshooting - Scrolling Carrots with Motion Panel and 6K
•
6K Troubleshooting - SSLEX0105E: Invalid Token, Line 1, Offset 10, <<
•
6K Troubleshooting - Stalling Due to Mechanical Backlash
•
6K Troubleshooting - TASF BIT 12 -- Stall Detected
•
6K Troubleshooting - TASF BIT 13 -- Drive Shutdown
•
6K Troubleshooting - TASF BIT 14 -- Drive Fault Occurred
•
6K Troubleshooting - TASF BIT 15 & 16 -- Hardware Limit Hit (End of Travel Limits)
•
6K Troubleshooting - TASF BIT 23 -- Position Error Exceeded
•
6K Troubleshooting - TASF BIT 26 -- Motion Suspended
•
6K Troubleshooting - TASF BIT 30 -- Move Not Possible
•
6K Troubleshooting - TASF BITS 17 & 18 -- Software Limits Hit
•
6K Troubleshooting - TASX BIT 4 -- Drive Fault Input Active
•
6K Troubleshooting - TASX BIT 5 -- Encoder Failure
•
6K Troubleshooting - The ARP Entry Addition Failed: 5
•
6K Troubleshooting - The Panels Do Not Work (Motion Planner)
•
6K Troubleshooting - Turning Off My Computer Stops My Program.
•
6K Troubleshooting - VBSCRIPT Panels Will Not Run (WIN7 or Before Only - Not Compatible Under WIN10)
•
6K Troubleshooting - Visual Basic Run - Time Error 2147418107
•
6K Troubleshooting - Why Am I Having 6K Program Download or Upload Problems?
•
6K Troubleshooting - Why Does the 6K Not See My Drive Fault?
•
6K Troubleshooting - Why Does the COM6SRVR Use 100% of the CPU?
•
6K Troubleshooting - Why Is My Analog Input Card Not Working Properly?
•
6K Troubleshooting - Why Is My Motion Jerky/Erratic/Not Smooth?
•
6K Troubleshooting - Why STARTP Will Not Always Work
•
6K Troubleshooting - Write Command in a Program While Using Port 2 (Doesn't Display on the Terminal or Other Device)

EMC Industrial Public Knowledge Base

/

/

6K (Discontinued)

/

6K Software - Using the COM6SRVR as an ActiveX (OCX) Component

6K Software - Using the COM6SRVR as an ActiveX (OCX) Component

Owned by Jack Degrano

Last updated: Jun 27, 2024 by Eric Rojas (Unlicensed)

1 min read