Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

No you can not clone an 890 via a keypad. In order to 'clone' a new 890 drive you must use DSELite or DSE890 and upload the configuration in a general extract/install procedure.

  • Potentially, you may need to run an additional autotune on the new 890 drive to ensure proper functionality after installing the configuration.

See this FAQ for extracting and installing configurations: How to install/extract parameters for an 890

[QuickLink for the 890 on Parker.com] - Manual, QuickStarts, Product Support, etc

[QuickLink for the 890PX on Parker.com] - Manual, QuickStarts, Product Support, etc

12APR19 JD

  • No labels