Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Terminal A: Additional Digital Outputs

Terminal B: Master Reference which is used as reference 

Terminal C: Slave Encoder which can be used as either a reference or as the actual feedback like the 6055/HTTL encoder card

Terminal D: Encoder Reference Output which is used to output the encoder signal from the drive

For more information please consult the manual found on by following this QuickLink for the 690+ on Parker.com - (Manual, QuickStarts, Product Support, etc)

  • No labels