Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

The following software has been fully vetted for Windows 10 operation.

Current Win10 Support

Parker Motion Manager (all versions)     Full Win10 Support

comACRserver6                                      Full Win10 Support*

Drive Support Tool (P series Drives)       Full Win10 Support

PSD Servo Manager                               Full Win10 Support

C3 Servo Manager                                  Full Win10 Support

CoDeSys v2.3 (for Compax3 T30/T40)  Full Win10 Support

Xpress Manager 4.2.0                             Full Win10 Support**

Parker Remote Browser                          Full Win10 Support

Interact X  4.1                                          Full Win10 Support

Parker Automation Manager 1.3.0, 1.4.0    Full Win10 Support

ACRView 6.4.2                                        Win10 Support for all AcroBasic projects***

Aries Support Tool (AR-xxAE Drives)     Full Win10 Support

  • Installed and runs as part of PMM and ACR-View6. Can be used for third-party software (http://VB.Net , C++.Net , C#.Net, LabView, etc)

** Patch may be required: FlashFix

*** 9600 projects using IEC61131-3 editor not supported on Win10. Use Win7.

 

Motion Planner and com6srvr are not compatible with Win10.  Recommend replacing with newer ACR7C controller. Contact your local Automation Technology Center to discuss upgrade.

 

5/2017glh   

2/2018jh

7/2021jh updated

19JUL2021 DCLIFFE -- Minor correction.

  • No labels