Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

The part number for the flying lead cable already setup in our system is:
CP*71-025452-10

It's a 10-foot cable Dynaserv Honda connector to flying lead cable.

It's the same as the C1P-ENN-4202 cable listed in the manual.

For older Gen1 Dynaserv drives that have the 50pin Honda connector, the part number for a 6000 to Dynaserv 50pin Honda Cable that has the servo command signal wires and encoder feedback with flying leads on the controller end is: 71-014536-10

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.