Dynaserv Flying Lead Cable
- Perla Madrigal (Unlicensed)
- Eric Rojas (Unlicensed)
Owned by Perla Madrigal (Unlicensed)
The part number for the flying lead cable already setup in our system is:
CP*71-025452-10
It's a 10-foot cable Dynaserv Honda connector to flying lead cable.
It's the same as the C1P-ENN-4202 cable listed in the manual.
For older Gen1 Dynaserv drives that have the 50pin Honda connector, the part number for a 6000 to Dynaserv 50pin Honda Cable that has the servo command signal wires and encoder feedback with flying leads on the controller end is: 71-014536-10