Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

  1. Only if the drive is being controlled through the remote terminal connections.

  2. If the keypad is connected with the drive powered up, a COMS CODE fault may occur.

  3. Cycle power to reset the fault.

[QuickLink for the 890 on Parker.com] - Manual, QuickStarts, Product Support, etc

[QuickLink for the 890PX on Parker.com] - Manual, QuickStarts, Product Support, etc

7NOV2016 LS

  • No labels