Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

When given the commands V0 and GO1, the 6000 series products report back their status as follows:

In TASF the (at velocity) bit will never read at velocity (yes). The same goes for the at ratio bit in the TFSF commands. If a folrn is set to 0 the status will never be at ratio(yes).

These bits will evaluate true for other velocities and ratios as expected.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.