Status Bits and Commanding a Velocity of Zero
- Marisol Hernandez (Unlicensed)
- Eric Rojas (Unlicensed)
Owned by Marisol Hernandez (Unlicensed)
When given the commands V0 and GO1, the 6000 series products report back their status as follows:
In TASF the (at velocity) bit will never read at velocity (yes). The same goes for the at ratio bit in the TFSF commands. If a folrn is set to 0 the status will never be at ratio(yes).
These bits will evaluate true for other velocities and ratios as expected.