In the new OEM010/OEM750x software reference guide, page 70 shows the circuitry for the 010 inputs and outputs. It states that there is a dedicated fault output. This is incorrect. On the 010, there is a dedicated fault INPUT, with the same circuit as the triggers shown on the next page. It is only when the 010 is packaged with a drive, such as in the PDX, that there is a dedicated fault output. The text and the diagram is wrong. The only thing that is correct is the part that says maximum low level 0.8v, sinks 1.2mA.
General
Content
Integrations
Add Comment