Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

In the new OEM010/OEM750x software reference guide, page 70 shows the circuitry for the 010 inputs and outputs. It states that there is a dedicated fault output. This is incorrect. On the 010, there is a dedicated fault INPUT, with the same circuit as the triggers shown on the next page. It is only when the 010 is packaged with a drive, such as in the PDX, that there is a dedicated fault output. The text and the diagram is wrong. The only thing that is correct is the part that says maximum low level 0.8v, sinks 1.2mA.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.