Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

When an ACRCOMM board is removed from an ACR2000, the battery enable jumpers on the motherboard MUST be disabled. If these are left enabled without the ACRCOMM board, the ACR2000 card will not operate and will cause the green LED to blink on then off. Or it will blink on and off continuously.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.