Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Ordering Code for ACR9000, 9030, 9040, 9600, 9630 and 9640 controllers

Notes:

3:
96xx models are only available with P3 option
P0 and P2 options are no longer available

4: 
9040 and 9640 models are only available with U0 option.
9x00, 9x30 must select U2 thru U8
9030 and 9630 models include 16 axes of ETHERNET Powerlink control. However only 16 total axes can be used at one time. For example, with a 9630P3U8 a user could control 4 servos, 4 stepper and 8 EPL axes. With the same controller, the user could alternatively control 7 steppers and 9 EPL axes.

5: M option only available with 9000 models.

6:  Analog inputs are only available for 9000 and 9600 models,cannot be combined with ETHERNET Powerlink models

 

nov 2013 jw

9030P1U2B0 , 9030P1U4B0 , 9030P1U6B0 , 9030P1U8B0 , 9030P3U2B0 , 9030P3U4B0 , 9030P3U6B0 , 9030P3U8B0 , 9040P1U0B0 , 9040P3U0B0 , 9630P3U2B0 , 9630P3U4B0 , 9630P3U6B0 , 9630P3U8B0 , 9640P3U0B0 ,9000P1U2B0 , 9000P1U2B1 , 9000P1U2M0 , 9000P1U2M1 , 9000P1U4B0 , 9000P1U4B1 , 9000P1U4M0 , 9000P1U4M1 , 9000P1U6B0 , 9000P1U6B1 , 9000P1U6M0 , 9000P1U6M1 , 9000P1U8B0 , 9000P1U8B1 , 9000P1U8M0 , 9000P1U8M1 , 9000P3U2B0 , 9000P3U2B1 , 9000P3U2M0 , 9000P3U2M1 , 9000P3U4B0 , 9000P3U4B1 , 9000P3U4M0 , 9000P3U4M1 , 9000P3U6B0 , 9000P3U6B1 , 9000P3U6M0 , 9000P3U6M1 , 9000P3U8B0 , 9000P3U8B1 , 9000P3U8M0 , 9000P3U8M1 , 9600P3U2B0 , 9600P3U2B1 , 9600P3U4B0 , 9600P3U4B1 , 9600P3U6B0 , 9600P3U6B1 , 9600P3U8B0 , 9600P3U8B1

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.