Parker ACR9000 Series Order Code

Owned by Perla Madrigal (Unlicensed)
Last updated: Aug 09, 2024 by James Wiley
2 min read

Ordering Code for ACR9000, 9030, 9040, 9600, 9630 and 9640 controllers

All models are discontinued as of June 2024. Recommended replacement: ACR7000

image-20240809-123029.png

Notes:

  1. All versions include AcroBasic programming.

  2. - 00 and 30 models powered from 120/230VAC
    - 40 models powered from 24VDC

  3. - 96xx models were only available with P3 option
    - P0 and P2 options are no longer available

  4. - 9040 and 9640 models are only available with U0 option.
    - 9x00, 9x30 must select U2 thru U8
    - 9030 and 9630 models include 16 axes of ETHERNET Powerlink control. However only 16 total axes can -be used at one time. For example, with a 9630P3U8 a user could control 4 servos, 4 stepper and 8 EPL axes. With the same controller, the user could alternatively control 7 steppers and 9 EPL axes.

  5. M option only available with 9000 models.

  6. Analog inputs are only available for 9000 and 9600 models, cannot be combined with ETHERNET Powerlink models

 

nov 2013 jw

 

9030P1U2B0 , 9030P1U4B0 , 9030P1U6B0 , 9030P1U8B0 , 9030P3U2B0 , 9030P3U4B0 , 9030P3U6B0 , 9030P3U8B0 , 9040P1U0B0 , 9040P3U0B0 , 9630P3U2B0 , 9630P3U4B0 , 9630P3U6B0 , 9630P3U8B0 , 9640P3U0B0 ,9000P1U2B0 , 9000P1U2B1 , 9000P1U2M0 , 9000P1U2M1 , 9000P1U4B0 , 9000P1U4B1 , 9000P1U4M0 , 9000P1U4M1 , 9000P1U6B0 , 9000P1U6B1 , 9000P1U6M0 , 9000P1U6M1 , 9000P1U8B0 , 9000P1U8B1 , 9000P1U8M0 , 9000P1U8M1 , 9000P3U2B0 , 9000P3U2B1 , 9000P3U2M0 , 9000P3U2M1 , 9000P3U4B0 , 9000P3U4B1 , 9000P3U4M0 , 9000P3U4M1 , 9000P3U6B0 , 9000P3U6B1 , 9000P3U6M0 , 9000P3U6M1 , 9000P3U8B0 , 9000P3U8B1 , 9000P3U8M0 , 9000P3U8M1 , 9600P3U2B0 , 9600P3U2B1 , 9600P3U4B0 , 9600P3U4B1 , 9600P3U6B0 , 9600P3U6B1 , 9600P3U8B0 , 9600P3U8B1