Connecting a Parker IO (PIO) to an ACR9000
- Perla Madrigal (Unlicensed)
- Corey Boyles
Owned by Perla Madrigal (Unlicensed)
When using a PIO 337 or 347, there are 4 wires that need to be connected. One side has the ACR9000 connection and the other side has 4 flying leads. Shown below in the table are the connections that need to be made. For the CAN BUS connection, pin 1 is on top and pin 5 is on the bottom.Â
ACR9000 pins | Color | Function | BUS coupler connection |
|---|---|---|---|
2 | White | CAN_L (CAN Signal Low) | 4 |
3 | Black | CAN_GND | 5 |
7 | Blue | CAN_H (CAN Signal High) | 2 |
5 | Clear | Drain,Shield | 3 |