TQ10/TQ10X - DIP SWITCH SETTINGS FOR BE MOTORS

The BE Series servo motors (both 23- and 34-Frame) can be used with -02 versions of both TQ10 drives and TQ10X drive/controllers. The chart below contains the DIP switch settings for configuring for use with the following BE motors:

LEGEND:
1 = DIP switch in the ON position
0 = DIP switch in the OFF position

BE Motor	DIP Switch Bank SW1	DIP Switch Bank SW2	DIP Switch Bank SW3

BE Motor	DIP Switch Bank SW1	DIP Switch Bank SW2	DIP Switch Bank SW3
BE230D	101011	111011	010
BE230F	111011	101001	010
BE231D	001011	111011	111
BE231F	111011	101101	111

BE232D	101011	111111	111
BE232F	111011	101101	111
BE233D	001011	111111	111
BE233F	111011	101011	111
BE341F	111001	101111	111
BE341J	111011	101001	111
BE342H	111010	101011	111
BE342K^*	111001	100001	111
BE343J	111010	101101	111
BE343L^*	111010	100001	111
BE344J	111010	101011	111
BE344L^*	111010	100001	111

^*Foldback disabled for motors with continuous current greater than 10 Amps.