Compax Replacements

Single Axis Compax Drives:

	COMPAX1000SL	COMPAX2500S	COMPAX4500S	COMPAX8500S
Continuous Current	2.5A	6.3A	6.5A	12.5A
Peak Current	5.0A	12.6A	13.0A	25.0A
Input Mains Voltage	120-230vac, 1phase	120-230vac, 1 or 3phase	230-460VAC, 3phase	230-460VAC, 3phase
Input Control Voltage	24vdc	24vdc	24vdc	24vdc
W X H X D (mm)	85 x 206.5 x 145.5	130 x 290 x 221	145 x 395 x 275	145 x 395 x 275
Suggested C3 Replacement	S025V2F10I11T30M00	S063V2F10I11T30M00	S075V4F10I11T30M00	S150V4F10I11T30M00

Multi Axis Compax Drives:

	COMPAX200M	COMPAX500M	COMPAX1500M	COMPAX3500M
Continuous Current	6.5A	11.5A	25A	50A
Peak Current	8.5A	17A	50A	100A
Voltage	140-650VDC from NMD Power Supply
Suggested C3 Replacement	M100D6F10I11T30M00	M150D6F10I11T30M00	M300D6F10I11T30M00	*H050V4F10I11T30M00 @ 400vac or H090V4F10I11T30M00* for 480vac**

*Compax3H series is a High Powered single axis drive and not used with the C3M power supplies.

Above are base servo amplifiers only capable of analog torque, analog velocity, step & direction and encoder following modes. For the 30M, 60M and 70M options:

Technology Levels:

COMPAX xx30M: Indexing table control	Standard Compax3 T11, T30 and T40 capable of Load Mounted Feedback
COMPAX xx60M: Electronic gearing	Compax3 T30
COMPAX xx70M: Cam Control	Compax3 T40

Example: COMPAX2570S would be replaced with the S063V2F10I11T40M00

	NMD10	NMD20
Input Mains Voltage	100-480VAC 3phase	100-480VAC 3phase
Input Control Voltage	24vdc	24vdc
Continuous Power	10kW	10kW
Peak Power (<3sec)	20kW	20kW
Suggested C3 Replacement	MP10D6USBM00NA	MP20D6USBM00NA

Options	Description	Suggested C3 Replacement
A1	Absolute Encoder	SSI Encoder input on x11 on Standard Compax3. HEDA is M10/M11 option.
D1	D-to-A monitor w/o box	Standard Compax3 has 2 analog outputs.
E2	Encoder input module (individual unit)	Standard Compax3 has encoder input.
E3	Encoder simulation output	Standard Compax3 has encoder output.
E4	Encoder input module (encoder bus)	Standard Compax3 has encoder input. HEDA is M10/M11 option.
E7	Analog input module	Standard Compax3 has 2 analog inputs.
F1	RS485, 4 wire	Standard Compax3
F2	Interbus-S	No offering
F3	Profibus	Standard Compax3 with I20
F4	CAN bus (BasicCAN protocol as per specification 1.2)	No offering
F5	RS485, 2 wire	Standard Compax3
F7	C31System Bus - ABB interface.	No offering
F8	CAN open (Protocol as per CiA DS 301. Profile CiA DS 402 for drives.)	Standard Compax3 with I21
S1	SinCos encoder (single turn)	Standard Compax3 with F11
S2	SinCos encoder (multi turn)	Standard Compax3 with F11
S3	Linear motor support	Standard Compax3 with F12

Above are suggested replacements. Applications should be reviewed by your local Parker Automation Technology Center to insure replacement products have all features being used in the machine application.

06FEB2019 12:56 DCLIFFE -- Fixed link.