P Series Drives - Limit and Home Wiring

Owned by Perla Madrigal (Unlicensed)
Last updated: Jul 31, 2024 by James Wiley
1 min read

Example limit and home wiring for P Series Drive.

 Pin assignments shown below are based on factory default settings. 

Normally Closed (NC)sensors are typically recommended for End of Travel Limits. 

Use Drive Support Tool Software to change POT (Positive End of Travel) and NOT (Negative End of Travel) when using NC limits. 

 

io_low_3285-20240521-001050.png

 

PD-xxP Indexer Drive with NPN sensors

npn_pd_p_3286-20240521-001051.png

 

PD-xxP Indexer Drive with PNP sensors

 

PD-xxC EtherCAT Drive with NPN sensors

 

PD-xxC EtherCAT Drive with PNP sensors

Â