DC Brushed Motor with the OEM770

Owned by Perla Madrigal (Unlicensed)
Last updated: Aug 08, 2024 by Eric Rojas (Unlicensed)
1 min read

This procedure works on these OEM drives:OEM770X, OEM770T, and OEM770SD.

  1. Connect HALL 1 and HALL 2 to HALL GND.

  2. Make no connections to HALL 3.

3)Connect the drive's Phase A to your motor's positive input.
4)Connect the drive's Phase C to your motor's negative input.