What Software and Communication Cable Are Used for Programming an AC10?

Owned by Corey Boyles
Last updated: Aug 05, 2024 by Eric Rojas
1 min read

  1. Typically the configuration is accomplished via the keypad and consulting the manual for parameter definitions. The Quickstart guide is useful for calling out the minimum information required to move a motor during initial setup.

  2. However, programming via DSELite is also available

    1. The programming connection is a 2-wire RS485 to the terminal strip (A+ and B-) and requires a USB to RS485 converter.

    2. Consult the FAQs in the sidebar for connecting to the AC10 using the advised 1002-00 converter module or using a USB to RS485 converter.

[QuickLink for the AC10 on Parker.com] - Manual, QuickStarts, Product Support, etc

3JAN2017 LS

12SEP19 JD