Where to Find Default Configurations on the AC30?

Owned by Perla Madrigal (Unlicensed)
Last updated: Aug 05, 2024 by Eric Rojas (Unlicensed)
1 min read

The AC30 allows you to select default configurations off of the keypad, PDQ/PDD, or DSELite. This will overwrite your existing project. 

More information on these templates can be found in the quickstart and software manual. Follow this QuickLink for the AC30 on Parker.com (Manual, QuickStarts, Product Support, etc)

To find them using the Graphical Keypad (GKP):

(This menu will not be available on the Keypad with LinkNet firmware)

  1. Choose SETUP

  2. Choose Application

  3. Choose App Selection

    1. BASIC SPEED CONTROL

    2. AUTO/MANUAL CONTROL

    3. SPEED RAISE/LOWER

    4. SPEED PRESETS

    5. PROCESS PID

In PDQ / PDD:

  1. Select: New Project

  2. Select Firmware version (Templates for older firmware revisions can also be listed - check 'Show Older Firmware' box)

As an example for target Firmware 1.13:

  • Basic - First basic application for AC30

  • Default - Basic Speed Control, Raise/Lower, Preset speeds, Auto/Manual, and PID applications

  • Fan - Fan Application

  • Pump - Pump Application (Metric units)

  • Pump - Pump Application (US units)

  • Winder - Winder App

 

In DSE Lite:

  1. Select FILE \ NEW \ AC30

    1.  AC30V:

      1. AUTO

      2. DFLT

      3. PID

      4. PSET

      5. RL

  1. AC30P/D

    1. AUTO

    2. DFLT

    3. PID

    4. PSET

    5. RL

  • AUTO is the Auto / Manual Control Template

  • DFLT is the Basic Speed Control Template

  • PID is the PID Control Template

  • PSET is the Preset Speeds Control Template

  • RL is the Raise / Lower Trim Template