Analog Output(s) Stuck at -1.3vdc
- Jack Degrano
- Corey Boyles
Owned by Jack Degrano
If the analog output(s) of an ACR controller card appear to be "stuck" at -1.3VDC, check the CONFIG command.
If the CONFIG command has STEPPER specified in the command and the card has DAC module(s) and not STEPPER module(s) the output of the DACs will have a value of -1.3 VDC and can not be changed.
To correct this problem, be sure the CONFIG command matches the physical hardware of the ACR controller card.
Â