Step & Direction Output
Step & Direction Output
There is a delay between Step output and the motion on the motor; the motion starts first.
PAPKA (which is a chip inside the Gemini drives) creates the pulses out like a servo loop and has a servo update rate. It could also dither even when the motor is standing still.
, multiple selections available,
Related content
Torque, Velocity & Position Loops
Torque, Velocity & Position Loops
More like this
P Series Drives - Indexer Version - Analog Mode or Step & Direction (Pulse) Mode Sample Configurations & Notes for ACR9000 and ACR7000 Controllers
P Series Drives - Indexer Version - Analog Mode or Step & Direction (Pulse) Mode Sample Configurations & Notes for ACR9000 and ACR7000 Controllers
More like this
Tuning the Gemini in Position Mode - Intro
Tuning the Gemini in Position Mode - Intro
More like this
P Series Software - Procedure Functions (EtherCAT OR Modbus/RTU)
P Series Software - Procedure Functions (EtherCAT OR Modbus/RTU)
More like this
6K Software - TASF BIT 1 -- Moving/Not Moving
6K Software - TASF BIT 1 -- Moving/Not Moving
More like this
Chopping Frequency of the Gemini Drive
Chopping Frequency of the Gemini Drive
More like this